POR-15 Motorcycle / Bike Fuel Tank Repair Sealer Kit
S215£59.00
The POR-15 Motorcycle Fuel Tank Repair kit contains everything you need to repair and restore any small fuel tank.
POR-15® High-Performance Coatings have been delivering the gold standard in rust prevention since 1978!
In stock
POR-15 Motorcycle / Bike Fuel Tank Repair Sealer Kit
Seals Tanks against fuels containing ETHANOL.
The POR-15 Motorcycle Tank Repair kit contains everything you need to repair and restore any small fuel tank.
DO NOT PUT LID BACK ON THE CAN ONCE OPENED, OR IT MAY EXPLODE!
This tank repair sealer kit includes:
– 1 x 946ml Cleaner Degreaser (was Marine Clean) to dissolve and remove gum and varnish that accumulates over the years;
– 1 x 946ml Metal Prep (was Prep and Ready) to remove rust, etch the interior surface, and leave a zinc phosphate coating to prevent further rusting.
– 1 x POR-15 Petrol Tank Sealer (236ml) that will seal up to 4 1/2 US Gallon tank / 3 3/4 UK Gallon (17L)
– a brush in case it is necessary to externally reinforce any badly corroded areas.
– Complete with full instructions.
Please note that once the tank sealer has been applied, you CANNOT reseal over it as it will not adhere to itself.
NOT Suitable for Plastic and Fibreglass Tanks
POR-15 Fuel Preservative and Stabiliser not included.
See the “How Do I Seal a Fuel Tank?” article in the Technical Articles section
Read “Dolly Springs A Leak” and see how Robert sealed his old fuel tank.
Read “How-To Get Tanked Up with POR15 Fuel Tank Sealer” and see how Dave restored an old fuel tank for Project 13/30.
Weight | 2.5 kg |
---|---|
Brand |
Click the links below to view the PDFs for POR-15 Motorcycle / Bike Fuel Tank Repair Sealer Kit.
Reviews
Only logged in customers who have purchased this product may leave a review.
Guest –
Bought the POR15 kit for motorbikes. Took a whole day to do the tank, and dried it between treatments with a hairdryer. It took a week to cure fully of at least until the smell of evaporating thinners to go away. What a fantastic product, coated the tank easily inside, was a bit tricky to drain off excess (Tank design Honda CB900FA (1980)). Sealed a treat and works perfectly.
Guest –
I used this product four years ago to seal light rust inside my BSA fuel tank. No issues, still looks great!
DO NOT GET ANY PRODUCT ON THE PAINTWORK; IT STICKS LIKE SH*T!
Guest –
I reviewed POR15 last year. POR15 is still looking good!
Guest –
This is a great product. Allow plenty of time to dry between applications. I used a hot air gun, on low to assist with drying. An hair drier will do exactly the same. If you follow the instructions on drying this is a great product. My tank looks like it will last another 74 years and no rust.